Supply and Installation of split air conditioning system

Split system air conditioners are very ideal and energy efficient to cool or heat a room or a certain area. A split air conditioner consists of two main parts Indoor unit which is installed on a wall inside the room where cooling is required and Outdoor unit which is located outside and has a compressor unit. These two units are connected with copper pipes.

A split system with the highest ENERGY STAR rating allows your system to be more energy efficient and also helps to keep the environment clean and lower your monthly power bill by using less energy. Many air conditioning brands offer split systems with stylish and modern design, Very efficient and quiet operation, good energy rating.

When it comes to selecting your air conditioner make and model few things written below those you would have to consider

  • Cooling and heating capacity of the unit – Many factors are considered to determine heat load capacity but generally we calculate the room size and advise the required system capacity, also you can use the quick help guide given below.
  • Design of the air conditioner that compliments your home interior
  • Energy star rating
  • Sound pressure level to make sure it operates quietly.
  • R32 Refrigerant – most of the new split system air conditioners feature the new R32 refrigerant. Due to its superior qualities, the R32 refrigerant requires less energy to achieve the desired temperature and has nearly a 70% lower global warming potential when compared to the R410A refrigerant.
  • DC inverter compressor technology – DC inverter compressor is highly efficient compressor which operates on different speed/ capacity. The PAM inverter technology helps minimise the loss of electricity and boost the efficiency of the unit.
  • Wi Fi control- It’s never been easier to control your air conditioner from anywhere, anytime, A device is installed in the indoor unit which connects to your home network and once you download an app in your smartphone or tablet you can operate and control the air conditioner on your fingertips from anywhere as long as you have internet access on the device.
We install all types of air conditioners as per Australian standards by licensed technician and electricians, It is very important that the installation is completed as per Australian standards to be eligible for the manufacturer’s warranty.

Some split system air conditioning installations are a complex installation which involves extended pipe runs or the outdoor unit location could be on roof. Middle wall indoor unit installation may require condensate drain pump. Any complex installations or special situations require a site visit to quote properly.

What is a Standard, Back to Back Installation?
  • The indoor unit is installed on or against an external wall
  • The outdoor unit is installed on an existing flat and level surface
  • Maximum 3 meters of refrigerant pipe length between the Indoor and outdoor unit.
  • Maximum Electrical power circuit length of 15m ( usually electricity meter box to outdoor unit location )
  • Includes any wall penetration, capping, ducting and isolating switch as per AU Standards.

Quick guide for air conditioner selection

Room size square meter Cooling capacity of Air Con Unit
Approximately 20m2 2.5 KW
Approximately 26m2 3.5 KW
Approximately 40m2 5.0 KW
Approximately 48m2 6.0 KW
Approximately 55m2 7.0 KW
Approximately 61m2 8.0 KW
Approximately 69m2 9.0 KW
Brand we supply and install:

Multi split air conditioning system
With multi-split systems, you have the flexibility to choose the perfect indoor unit for each room. For example, you may want a super quiet, low capacity unit for a smaller bedroom and a stylish, higher capacity unit for the larger living room. Plus, connect these to a single outdoor unit, rather than requiring one for each – saving on outdoor space. There’s no need for ductwork.

All indoor units on multi-split systems allow individual control of air conditioning in each space. This allows you to adjust the temperature to suit comfort levels and ensure that it is only operating when needed.

Most of the brands we supply come with different cooling capacities and indoor models to choose from so you get flexibility of your own choice.